Menu
Back

WB-0001

The WB-0001 detects the presence of water or conductive fluids once it reaches a level that bridges the two conductive strips on the bottom of the housing. Once the strips are bridged, audible and visual alerts as well as an internal switch are triggered. The sensing hight can be adjusted from 0.08 mm to 13.5 mm using the included adjustable mounting bracket (that can be attached to any flat surface by either using the attached adhesive strips or mounting screws). 

Advantages

  • Detect leaks as soon as they occur
  • Visual and audible alarm
  • Battery powered
  • Adjustable sensing hight
  • Relay output

Applications

  • Protecting equipment from water damage
  • Drip pans in air handler units

  • Raised floors in data centers, museums, archives and cellars
Parameters Water or conductive fluids
Range of application 0…50 °C
Power consumption 0.9 mA steady state / 3.0 mA during alarm condition
Power supply 3V CR2450 lithium metal battery
Battery lifetime 5 years steady state / 48 hours during alarm condition
Cable lengths 1.5 metres
Housing ABS and polycarbonate
Audible alarm At least 85dB @30 cm distance
Delivery package 1 CR2450 lithium metal battery Short instruction manual
Dimensions 53 x 105.23 x 30.77 mm
IP protection class Water tight up to 3/4 of the body hight
Switch type SPST NO SSR
Visual alarm Red LED for water level, Yellow LED for low battery
Weight 137.5 g

Want to learn more about our products?
We will be pleased to personally advise you.

+1 905 754-5164
sales@rotronic.ca

Contact Information

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy

* Required Fields