XB - OEM transmitter

The XB OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection possibilities, the transmitter can be adapted to customer wishes and used practically everywhere.

OEM transmitters in climate chambers, incubators, monitoring of industrial processes, etc.

• Accuracy at 23 °C ±5 K: ±1.0 %rh / ±0.2 K
• Range of application probe: depending on probe from -100 to 200 °C 1
• Range of application electronics: -40…85 °C
• Large choice of probes
• Freely scalable analog outputs
• Simulator mode
• Direct 4-wire Pt100 connection (optionally available)
• Power supply
- Low voltage 3/4-wire (XB3x)
- Low voltage 2-wire (XB20)
• Signal outputs
- Current output
- Voltage output
• Version
- Printed circuit board with cable probe
• Probes
- PPS and chromium steel probes
- Probe diameter: 15 mm or 25/15 mm
- Probe length to 700 mm
- Cable lengths 2 and 5 m
• Output parameters
- Humidity & temperature
- Dew/Frost point & temperature or humidity

Accuracy at 23 ±5 °C ±1.0 %rh / ±0.2 K
Operating range -40…85 °C / 0…100 %rh
Measuring range with integrated probe -100…200 °C / 0…100 %rh
Long-term stability <1 %rh / year
Humidity sensor Hygromer IN-1
Temperature sensor PT100 1/3 DIN Class B
Allowed wind speed 40 m/s, with filter
Psychrometric calculations Dew or frost point
Number of probe inputs 1
Firmware update With internet and HW4 software
Circuit type 2 -Wire or 3/4-Wire
Max. cable length Up to 5 m with passive cable. Up to 100 m with active cable.
Probe material Dependent on probe
Service Interface Mini USB (UART)
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible

Want to learn more about our products?
We will be pleased to personally advise you.

+1 905 754-5164

Contact Information

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy

* Required Fields