Equipped with an automatic sensor heater, it is activated cyclically and prevents condensation on the sensor.
The HC2-S(3)-HEATED is suitable for use wherever high humidity with the possibility of condensation is present. Typically, when condensation occurs long dry out periods are required or false readings are measured. This is often the case in environmental chambers, food manufacturing, tunnels/caves and many other applications.
• Measures relative humidity, temperature and dew point
• Outstanding accuracy and repeatability
• Automatic heating function
• Eliminates of condensation
• SMD Thermo sensor element
|Probe type||Humidity and temperature probe|
|Range of application||-50...+100 °C / 0...100 %RH|
|Accuracy at 23 ±5 °C||±1.3 %rh / ±0.15 K|
|Power supply||3.2...5.0 VDC (adjusted at 3.3 VDC)|
|Current consumption||<35 mA at VDD = 3.3 VDC / <60 mA at VDD = 5 VDC|
|Long-term stability||< 1 %RH/year / < 0.1 °C/year|
|Heating capacity||+3 °C above normal temperature|
|Heating period||1 min.|
|Measurement period||1 min.|
|Measuring-heating-cooling cycle||6 min.|
|Heating element||SMD Thermo|
|Humidity sensor||SMD Thermo|
|Temperature sensor||SMD Thermo (Pt100)|
|Probe protection||Polycarbonate plastic cage|
|Filter cartridge||Polyethylene dust filter, gray, 20 um|
|Maximum wind velocity||3 m/s, without filter; 20 m/s, with polyethylene filter|
|Response time||Typically 8 s, 63 % of a step change from 95 to 45 %RH (1 m/s air flow at sensor, without filter)|
|IP protection rating||IP65|
|CE / EMC conform||2004/108/EC|
|Maintenance||Annual calibration recommended|
|Dimensions||Ø15 x 85 mm|
Want to learn more about our products?
We will be pleased to personally advise you.
+41 44 838 11 44