The Probe for Hydrogen Peroxide Environments.
Hydrogen Peroxide Sterilization
Hydrogen peroxide (H2O2) is used to sterilize cleanrooms, incubators and other equipment. In this process the air is saturated by gassing or spraying, resulting in the formation of a microfilm on all surfaces. The hydrogen peroxide kills off all microorganisms. The H2O2 is then either recovered mechanically or allowed to decompose naturally over a period of 48 hours to harmless H2O or O2. The humidity level during the application is crucial for the effectiveness of the process.
Standard humidity sensors have difficulty measuring accurately in high concentration H2O2 environments. The Hydrogen Peroxide inhibits the measurement of water vapour by occupying the pores on the surface of the sensor. This is why ROTRONIC has developed a special sensor, the HYGROMER® HH-1. The life of the sensor is greatly extended compared with that of the standard sensor for these applications. Please see the sensor data sheet for exact technical data on the sensor.
- Measures relative humidity, temperature and dew point
- With HYGROMER® HH-1 sensor for hydrogen peroxide environments
- Highest possible measuring accuracy
- Conforms to FDA CFR21 Part 11/GAMP
|Probe type||Humidity and temperature probe for hydrogen peroxide applications (H2O2)|
|Accuracy||±0.8 %RH, ±0.1 K, at 10...30 °C|
|Measuring range with integrated probe||-50…100 °C / 0…100 %rh|
|Accuracy analog output||±1 mV|
|Power supply||3.3…5 VDC|
|Current consumption||4.5 mA at 3.3 VDC|
|Humidity sensor||Hygromer HH-1|
|Continuous H2O2 load||880 ppm / 1200 mg/m3|
|Temperature sensor||PT100 1/3 DIN Class B|
|Filter type||No filter|
|Response time t 63||<15 sec.|
|Calculations||Dew / Frost point|
|Audit Trail/ electronic records||FDA 21 CFR Part 11 and GAMP compatible|
|Analog output signal (standard)||0…1 V = 0...100 %RH
0…1 V = -40...60 °C
(default setting, freely scalable via HW4 software and AC3001 cable)
|Housing||Stainless steel 1.4301|
|IP protection rating||IP65|
|CE / EMC conform||EMC Directive 2007/108/EC|
|Storage and transport conditions||-50…100 °C|
Want to learn more about our products?
We will be pleased to personally advise you.
+41 44 838 11 44