Back
HygroFlex3 - HF3 - HVAC transmitter
R-Type / S-Type
Measures relative humidity and temperature and calculates the dew/frost point in offices and rooms where good looks play a role.
W-Type / D-Type
Measures relative humidity and temperature and calculates the dew/frost point in HVAC applications focused on relability and repeatability.
Features
• Accuracy: ±2 %rh / ±0.3 K at 23°C ±5 K
• Temperature limit at probe: -40…60 °C / 0…100 %rh
• Range of application electronics: -40…60 °C / 0…100 %rh, -10…60 °C with LCD
• Service interface
• Adjusted at 23 °C and 10, 35, 80 %rh
| Accuracy at 23 ±5 °C | ±2.0 %rh / ±1.0 %rh (Type R), ±0.3 K / ±0.2 K (Type R) |
|---|---|
| Probe type | Integrated |
| Operating range | -40…60 °C / -10…60 °C (Models with display) 0…100 %rh, non-condensing |
| Measuring range with integrated probe | -40…60 °C / 0…100 %rh |
| Power consumption | 15…40 VDC or 12…28 VAC/ <100 mA |
| Probe protection | Polycarbonate plastic cage, white |
| Filter cartridge | Polyethylene dust filter, gray, 20 um |
| Response time t 63 | <12 s for 63% of a 35> 80% (1 m / sec air flow at the sensor) |
| Allowed wind speed | 20 m/s, with filter |
| Psychrometric calculations | Dew or frost point |
| Backlight | with Backlight |
| Display type | Optional graphics display. Presentation configurable. |
| Measurement interval | typically 1 second (without calculations) |
| Reproducibility Airchip | <0.02 %rh / 0.01 K |
| Alarm indicators | Yes |
| Exploitation software | ROTRONIC HW4 |
| Trend indicator | Yes, for models with display |
| Probe adjustment by software | Yes, with service cable |
| Remote control functions | Via HygroPalm and service cable |
| Software Update | With internet and HW4 software |
| User information | from Software HW4 (devicemanager) |
| Data processing via HW4 | with interface cables |
| Device Protection by password | Yes |
| Analogue outputs scaleable by the user | Yes |
| Analog output signal (standard) | 0…20 mA, 4… 20 mA; 0… 1 V, 0… 5 V, 0… 10 V |
| Change of output signal w/o adjustment | Yes |
| Digital output signal (standard) | UART |
| Min. / max. load voltage / current signal | V min = 10 V + (0.02 x Load*) * = Resistance in ohms |
| Service Information | Calibration interval |
| Type of output signals | 2 |
| Enclosure material | ABS |
| Fire protection class | Complies UL94-HB |
| IP protection rating | HF3x-S/ HF3x-R: IP20 HF3x-W/ HF3x-D: IP65 |
| Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
| Probe material | Polycarbonate |
| Service Interface | Mini USB (UART) |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
| Dimensions | Wall: ø 82 x 43, probe length 100 mm Duct: ø 82 x 43, probe length 207 mm Room: 82 x 82 x 26 mm |
Want to learn more about our products?
We will be pleased to personally advise you.
