RMS-D-L - RMS-DISPLAY - Freely Configurable Display

The LAN display is a freely configurable display. As a remote display, it can be placed optimally where it suits the viewer best. It is able to show the measured values, states and alarms of RMS products. The display shows up to four measured values. Two measured values are shown at a time. If more than 2 measured values have been selected, the display alternates between the values that are to be displayed every 5 seconds.


  • Shows up to 4 measured values
  • Automatic adjustment of backlight on alarm
  • Compatible with RMS data loggers, RMS On-premise and RMS SaaS
  • Conforms to FDA CFR 21 Part 11 / GAMP 5


  • Critical places
  • Cleanrooms

Compatible with:

  • All measuring points
  • RMS-GW RMS Gateway
  • RMS-WEB RMS On-premise
Display of measuring points Up to 4 measuring points
Device type RMS Display
Range of application -20…70 °C / 0…100 %RH
Power consumption 24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1
AC adapter requirements 24 VDC ±10 % / >4 W / power-limited
Measurement interval 10 s
Communication interfaces Ethernet
Protocols HTTP
Fire protection class UL94-V2
Housing PC / ABS
IP protection rating IP65
FDA / GAMP FDA 21 CFR part 11 / GAMP5
Display diagonal 2.26 inch
Storage and transport conditions -20...30 °C / 0...95 %RH
Dimensions 105 x 113 x 38 mm
Weight 206 g

Want to learn more about our products?
We will be pleased to personally advise you.

+44 1293 571000

Contact Information

* Required Fields

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy