RMS-DO-L-R - Digital Output Module

The digital output module serves to display information, issue alarms and control events. The relays can be interrogated or set via Modbus TCP or the RMS software. It is possible to define the conditions in the RMS software and to actuate the outputs on the basis of them.


  • Two output channels
  • Compatible with RMS-Config, RMS On-Premise and RMS SaaS
  • Conforms to FDA CFR 21 Part 11 / GAMP 5


  • Monitoring / Process control
  • Building automation
  • Industrial automation

Compatible with:

  • RMS-Config
  • RMS-WEB On-Premise
  • RMS-CLD SaaS solutions
Device type RMS-DO-L-R
Number of outputs 2, polarity-independent
Range of application -40…70 °C / 0...100 %RH
Power consumption 24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1
AC adapter requirements 24 VDC ±10 % / 4 W nominal /<15 W power-limited
Interface Digital signal / galvanically isolated
Relay switching capacity 50 VAC (peak) 1 A / 50 VDC/1 A, polarityindependent
Measurement interval >=10 s
Communication interfaces Ethernet
Protocols HTTP
Fire protection class UL94-V0
Housing Polycarbonate
IP protection rating IP20
Max. cable length <3 m
FDA / GAMP FDA 21 CFR part 11 / GAMP5
Storage and transport conditions -40..30 °C / 0..95 %RH
Dimensions 89.7 x 62.2 x 108 mm
Maximum altitude 2000 m ASL
Weight 155 g

Want to learn more about our products?
We will be pleased to personally advise you.

+44 1293 571000

Contact Information

* Required Fields

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy