Measuring instruments and accessories for meteorology
HC2A-S3A High-End METEOROLOGICAL PROBE
The HC2A-S3A probe is the meteorological probe with a white housing but with a different filter (Wire-mesh filter with 10 µm filter pore size suitable for meteorological applications). It measures relative humidity and temperature and calculates the dew/frost point and is designed for the use in Rotronic meteorological applications.
Features of the meteorological probe
- Accuracy: ±0.8 %rh, ±0.1 K, at 23 °C (10...30 °C)
- Range of application: -50…80 °C / 0…100 %rh
- Digital interface (UART) and scalable analog outputs, 0…1 V
- Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
Advantages
- Especially designed for the use in meteorological applications
- New humidity sensor HYGROMER HM1-SK
- Outstanding accuracy, repeatability and long-term stability
- Available with interchangeable sensor
- Hot swappable, no calibration adjustment required due to the digital interface with Rotronic devices
Smart Electronic
- Based on the Rotronic’s AirChip3000
- Calculates the dew / frost point
- Saves adjustment data so that probes can be interchanged without re-adjusting (Hot-swappable)
Flexibility and Compatibility
- User scalable analog analog ouput signals (2x 0…1V)1
- Digital interface via UART
- Compatible with Rotronic devices HF5, HF8 and HP32
| Probe type | High-End Meteorological Probe |
|---|---|
| Humidity sensor | Hygromer HM1-SK |
| Temperature sensor | PT100 1/3 DIN Class B |
| Long-term stability | <1 %rh / year with clean air or similar (See also pollutant table in the catalogue) |
| Accuracy w. adjustment profile "standard" | ±0.8 %RH / ±0.1 K, at 10...30 °C Adjustment at 23 °C and 10, 35, 80 and 90 %RH |
| Reproducibility Airchip | <0.02 %rh / 0.01 K |
| Response time t 63 | <15 sec. |
| Power consumption | 3.3...5 VDC, Calibration @ 3.3 VDC / ~4.5 mA |
| Dimensions | Ø15 x 108 mm |
| Operating range | -50…80 °C / 0…100 %rh |
| Allowed wind speed | Max. 50 m/s, with wire-mesh filter |
| Exploitation software | ROTRONIC HW5 |
| Psychrometric calculations | Dew or frost point |
| Analogue outputs scaleable by the user | Yes |
| Software Update | With internet and HW5 software |
| User information | from Software HW5 (devicemanager) |
| Type of output signals | 2 x 0…1 VDC |
| Digital output signal (standard) | UART |
| Service Interface | UART |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Device Protection by password | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Communication interfaces | UART |
| Reverse voltage protection | Mechanically in the connector |
| Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
| Probe protection | Polycarbonate plastic cage, white |
| Enclosure material | Polycarbonate |
| Weight | 17 g |
| Data Processing via HW5 | with interface cables |
| Filter type | Wire mesh filter, 10 μm |
-
HC2A-S3A - Short Instruction Manual Size: (324.84 KB)2022-04-20 02:41:52
-
HC2A-S3A - Datasheet Size: (350.95 KB)2022-04-20 02:41:52
-
HC2A-S3A - Datenblatt Size: (354.54 KB)2022-04-20 02:41:52
-
HC2A-S3A - Fiche technique Size: (354.54 KB)2022-04-20 02:41:52
-
HC2A-S3A - Scheda Tecnica Size: (352.78 KB)2022-04-20 02:41:52
-
Hygroclip 2 Advanced Manual V1.7 DE Size: (776.95 KB)2022-09-20 08:47:32
-
HC2A-S3A - CE Declaration Size: (90.08 KB)2022-09-20 08:47:32
-
Hygroclip 2 Advanced Manual V1.7 EN Size: (670.98 KB)2022-09-20 08:47:32
-
HC2A-S3A CE Declaration UKCA Size: (48.73 KB)2022-09-20 08:47:32
-
HC2A-S3A - UKCA Declaration Size: (42.42 KB)2023-01-05 10:53:28
Want to learn more about our products?
We will be pleased to personally advise you.
+81 422 502 600
info@michell-japan.co.jp
