RMS HARDWARE BY MEASUREMENT AND MONITORING PARAMETERS

Monitoring your Critical Control Parameters (CCP) with our RMS monitoring system helps you to conform to GxP and FDA 21 CFR Part 11/EU Annex 11. Rotronic RMS measuring instruments are specially developed for our RMS monitoring system, ensure data integrity and can also be integrated into third-party systems Modbus TCP . They monitor and measure relative humidity, temperature, CO2 and differential pressure. These are the most important parameters in environmental monitoring. However, there are no limits to other applications: for example, solutions for monitoring light (lux) and oxygen, as described in the section “Miscellaneous”. Thanks to analog and digital interfaces, water detectors and door contacts (open/closed) or third-party products such as particle meters, webcams, warning lights, etc. can also be integrated very easily via Modbus TCP or JSON API. In addition to the RMS products, Rotronic offers further measuring instruments for various parameters.



RMS Temperature

RMS Humidity

RMS Differential Pressure

RMS CO2

RMS Analog AI

RMS Digital DI/DO

RMS Miscellaneous



Please contact us




Selection of our RMS products

  1. RMS Legionella Monitoring Starter Kit

    The development of legionella in drinking water lines can be prevented by avoiding stagnations, a temperature range of 25 °C to 55 °C and biofilms on the insides of the pipes. Advance warning of risks can be obtained by logging temperature and flow velocity at critical points in the distribution system and evaluating the data.

    Learn More
  2. RMS Museum Starter Kit

    Climate and light are both factors that influence the preservation of museum exhibits and archive material as they cause damage by accelerating chemical and biological degradation processes. The RMS Museum Starter Kit is perfect for central monitoring of critical parameters.

    Learn More
  3. RMS Pharmacy Starter Kit

    Pharmacy laws and control of therapeutic products require controlled storage of medicines. For example, insulin and some antibiotic syrups need to be stored in special refrigerators.

    For monitoring of such refrigerators, we offer a special RMS Pharmacy Starter Kit.

    Learn More
  4. RMS T10-0001

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature.

    Learn More
  5. RMS T10-0002

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

    Learn More
  6. RMS T10-0003

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

    Learn More
  7. RMS T10-0004

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

    Learn More
  8. RMS T10-0005

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature.

    Learn More
  9. RMS T10-0006

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

    Learn More
  10. RMS T10-0013

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

    Learn More
  11. RMS T10-0113

    The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

    Learn More
  12. RMS T30-0006

    The T30 temperature sensors are resistance thermometers (Pt100 = positive measurement resistance), meaning that the resistance increases with increasing temperature. The sensors are compatible with the RMSLOG- T30-L, RMS-LOG-T30-868 and RMS-LOG-T30-915 data loggers.

    Learn More
  13. RMS-DI-L-R - Digital Input Module

    The digital input module stores all measured data on an event basis and sends it to the database via Ethernet

    Learn More
  14. RMS-DO-L-R - Digital Output Module

    The digital output module serves to display information, issue alarms and control events.

    Learn More
  15. RMS-GW-868 Gateway

    Interface between wireless data loggers and software

    Learn More
  16. RMS-HCD-IC102 - High Temperature Industrial Humidity Probe

    The HCD-IC is a completely digital probe designed for the Rotronic Monitoring System RMS. It measures humidity and temperature values from -100 to 200 °C and calculates the dew and frost point

    Learn More
  17. RMS-HCD-S - Humidity and Temperature Probe

    The HCD-S is a completely digital probe designed for the Rotronic Monitoring System RMS. It measures humidity and temperature and calculates the dew/frost point.

    Learn More
  18. RMS-LOG-L - Data Logger - LAN Interface

    The flexible dataprotection component of the Rotronic Monitoring System RMS Learn More
  19. RMS-LOG-T30-868

    The RMS-LOG-T30 is a data logger with two integrated analog-to-digital converters, to which two PT100 sensors can be connected for high-precision temperature measurement.

    Learn More