HygroPalm - HP23-A - multi-function hand-held indicator

The HP23 is a multi-function hand-held indicator that can read the data from two HygroClip2 probes and display relative humidity, temperature and a variety of calculated parameters (dew point, frost point, etc.) Any probe input can also be configured by the user to accept a third party analog probe (restrictions apply).

Probe selection is based on the application. Depending on the HygroClip2 probe model, the measurement range is between 0 to 100 %RH and -100 to 200°C (-148 to 392°F). The HygroClip2 probes feature durable sensors, consistent performance and can be hot-swapped to facilitate routine maintenance.

The HP23 indicator offers extensive settings and functions that can be enabled and configured by the user either directly from the keypad or with the ROTRONIC HW4 software.

The measurement results can be recorded continuously and these separated simply using the batch function. All ROTRONIC transmitters in the Airchip3000 series can be adjusted with the HP23-A via a service cable.

Mobile applications in HVAC, the pharmaceutical industry, building management systems, museums and warehouses

• Data recording function up to 10'000 data records (with date, time, batch no.)
• Two probe connections for all ROTRONIC HC2 probes or analog third-party probes
• Adjustment of transmitters HF3, HF4, HF5, HF7, HF8, via service cable
• All psychrometric calculations
• Integrated clock (real time clock) for timestamp for every measured value
• Battery charging function
• Interface (USB)

Accuracy at 23 ±5 °C Prob dependent
Operating range -10…60 °C / 0…100 %rh
Power consumption 9V battery or accumulator Power Supply: Consumption 10 mA without backlight
Long-term stability <1 %rh / year
Humidity sensor Probe dependent
Temperature sensor Probe dependent
Response time t 63 Probe dependent
Allowed wind speed Probe dependent
Psychrometric calculations All psychrometric values
Backlight with Backlight
Calibration / adjustment multipoint adjustment via keypad
Display resolution 3 decimals
Display type Standard, 3-line or large. Display freely configurable.
Initialisation time Typically <3 sec.
Number of probe inputs 2 (HygroClip2 or Analogue)
Keypad (with display only) Yes
Battery indicator Low Batt. Display
Real time clock w.backup battery Yes
Memory size 20,000 records (2x 10,000 data pairs)
Exploitation software ROTRONIC HW4
Menu guidance Yes
Trend indicator Yes, for models with display
Statistical functions Min / Max, Average
Probe adjustment by software Yes, with service cable
Probe adjustment by keypad 1 point or multi-point temperature and humidity adjustment
Event logging Yes
Software Update With internet and HW4 software
User information from Software HW4 (devicemanager)
Data processing via HW4 Graphics, statistics, analysis, qualification, etc.
Audit Trail/ electronic records FDA 21 CFR Part 11 and GAMP compatible
Choice of Battery / rechargeable battery Yes
Supply for 3rd party probes Yes, battery voltage
Service Information Date of last calibration
Enclosure material ABS
Fire protection class Complies UL94-HB
IP protection rating IP40
Max. cable length Up to 5 m with passive cable. Up to 100 m with active cable.
Probe material Dependent on probe
Reverse voltage protection Mechanically in the connector
Service Interface Mini USB
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible
Dimensions 196 x 72 x 35 mm
Weight 300.0000

Want to learn more about our products?
We will be pleased to personally advise you.

+65 6376 2107

Contact Information

* Required Fields

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy