HC2-IExxx-M - Screw-in probe

Stainless Steel Probe for Pressurized Conduits and Vessels

The metal industrial probe is especially suitable for high temperatures, demanding industrial environments and areas where hygiene plays an important role. The probe measures humidity and temperature and calculates the dew/frost point.

Food and pharmaceutical production, drying processes, industrial manufacturing

• Range of application: -100…200 °C, (screw-in probe; -50…200 °C) / 0…100 %rh
• Digital interface (UART) and scalable analog outputs, 0…1 V
• Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
• Adjusted at 23 °C and 10, 35, 80 %rh

Accuracy at 23 ±5 °C ±0.8 %rh / ±0.1 K
Accuracy w. adjustment profile "standard" at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Probe type Screw-in probe
Operating range -100…200 °C / 0…100 %rh
Measuring range -100...200 °C (short-term peak load) / 0...100 %rh
Power consumption 3.3 V ± 0.1V / ~4.5 mA
Long-term stability <1 %rh / year
Humidity sensor Hygromer IN-1
Temperature sensor PT100 1/3 DIN Class B
Probe protection Filter carrier, brass nickel plated
Filter cartridge depending on the application, order separately
Pressure Pressure-resistant to 100 bar / 1450 PSI
Response time t 63 <15 sec.
Allowed wind speed 3 m/s
Psychrometric calculations Dew or frost point
Connection thread of probe 1/2" G / 1/2" NPT
Reproducibility Airchip <0.02 %rh / 0.01 K
Exploitation software ROTRONIC HW4
Probe adjustment by software 1 Point & multipoint %rh & °C
Software Update With internet and HW4 software
User information from Software HW4 (devicemanager)
Data processing via HW4 with interface cables
Device Protection by password Yes
Analogue outputs scaleable by the user Yes
Analog output signal (standard) 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard) UART
Type of output signals 2 x 0…1 VDC
Enclosure material Stainless steel 1.4305 (V2A)
Max. cable length Up to 5 m with passive cable. Up to 100 m with active cable.
Probe cable material FEP, black
Probe material Stainless steel 1.4305 (V2A)
Reverse voltage protection Mechanically in the connector
Service Interface UART
FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible
Weight 290 g

Want to learn more about our products?
We will be pleased to personally advise you.

+65 6376 2107

Contact Information

* Required Fields

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy