Calibration of humidity and temperature measuring instruments
Although ROTRONIC probes boast excellent long-term stability, we still recommend that their calibration be checked regularly. One calibration per year normally suffi ces. Some of our customers, however, calibrate their probes more often; the range of calibration intervals extends from once a year to calibration before every measurement – depending on internal quality assurance rules.
The long-term stability of ROTRONIC probes is better than 1 %rh per year under normal conditions.
Recommended Products:
-
MICHELL HYGROCAL100The HygroCal100 provides a stable test chamber to quickly evaluate the performance of relative humidity sensors across a wide range of 5 to 95% relative humidity.
Learn More -
HygroGen2 - HG2-XL - Humidity CalibratorHumidity and temperature generators for calibration of humidity and temperature measuring instruments. Calibrates multiple probes simultaneously. Large chamber volume with shelves, up to 8 probes can be calibrated simultaneously, multiple small loggers can be calibrated.
Learn More -
ER-12KPush-on calibration devices, Ø 12 mm
Gasket with O-ring and thumb screw. For 1 probe, Brass, nickel-plated.
Learn More -
ERV-15Push-on calibration devices, Ø 15..15 mm
Push-on calibration devices. Gasket with O-ring and thumb screw. For 1 probe, Vertical calibration pos., Brass, nickel-plated
Learn More -
HygroGen2 - HG2-S - Humidity GeneratorPortable humidity and temperature calibrator. Generates stable humidity and temperature conditions for a wide range of customer set-points. HygroGen2 is a world leading temperature and humidity calibration solution for use both in the laboratory and also on site. Easy to set up and use. Calibrates multiple probes simultaneously (any manufacturer). Time saving, stable and minimal thermal gradients.
Learn More -
EAxx-SCS Humidity StandardsHumidity standards
Learn More -
EGSCalibration devices for all sword probes.
Learn More -
EMV-25Screw-on calibration devices, Ø 25 mm (PG11)
Gasket with seal face on probe. Cannot be used for HC2-S probes. For 1 probe, Vertical calibration pos., Aluminium, anodised.
Learn More -
EDM-15/15Push-on calibration devices for 2 probes, Ø 14…15 mm
Gasket with O-ring and thumb screw. For 2 probes, Brass, nickel-plated.
Learn More -
ER-05Push-on calibration devices, Ø 4…5 mm
Gasket with O-ring and thumb screw. For 1 probe, Brass, nickel-plated.
Learn More -
ER-15Push-on calibration device Ø 14…15 mm
Gasket with O-ring and thumb screw. For 1 probe, Brass, nickel-plated.
Learn More