Rotronic Monitoring System
RMS-DO-L-R - Digital Output Module
The digital output module serves to display information, issue alarms and control events. The relays can be interrogated or set via Modbus TCP or the RMS software. It is possible to define the conditions in the RMS software and to actuate the outputs on the basis of them.
Advantages
- Two output channels
- Compatible with RMS-Config, RMS On-Premise and RMS SaaS
- Conforms to FDA CFR 21 Part 11 / GAMP 5
Applications
- Monitoring / Process control
- Building automation
- Industrial automation
Compatible with:
- RMS-Config
- RMS-WEB On-Premise
- RMS-CLD SaaS solutions
Power consumption | 24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1 |
---|---|
Dimensions | 89.7 x 62.2 x 108 mm |
IP protection rating | IP20 |
Fire protection class | UL94-V0 |
Measurement interval | >=10 s |
Communication interfaces | Ethernet |
Max. cable length | <3 m |
Weight | 155 g |
Housing | Polycarbonate |
FDA / GAMP | FDA 21 CFR part 11 / GAMP5 |
Device type | RMS-DO-L-R |
Storage and transport conditions | -40..30 °C / 0..95 %RH |
Maximum altitude | 2000 m ASL |
AC adapter requirements | 24 VDC ±10 % / 4 W nominal /<15 W power-limited |
Protocols | HTTP |
Number of outputs | 2, polarity-independent |
Interface | Digital signal / galvanically isolated |
Relay switching capacity | 50 VAC (peak) 1 A / 50 VDC/1 A, polarityindependent |
Want to learn more about our products?
We will be pleased to personally advise you.
+65 6376 2107
sg.info@processsensing.com