Back
HC2-C04 / HC2-C05
Compact Humidity Probe for Tight Spaces
The miniature probe is used for humidity and temperature measurement in confined spaces. It also calculates the dew and frost point and can be mounted discretely.
Applications
Museums, glass cabinets, building material tests, automotive and aviation industries, testing
laboratories, paper, textile and pharmaceutical industries
Features
• Range of application: -40…85 °C / 0…100 %rh
• Digital interface (UART) and scalable analog outputs, 0…1 V
• Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
• Adjusted at 23 °C and 10, 35, 80 %rh
| Probe type | Cable probe |
|---|---|
| Operating range | -40…85 °C / 0…100 %rh |
| Accuracy at 23 ±5 °C | ±1.5 %rh / ±0.3 K |
| Accuracy w. adjustment profile "standard" | at 23 °C / 10, 35, 80 %rh ± 1.5 %rh / ± 0.3 K |
| Power supply / Power consumption | 3.3 VDC ±0.1 / ~4.5 mA |
| Long-term stability | <1 %rh / year |
| Humidity sensor | Hygromer IN-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Response time t 63 | <15 sec. |
| Allowed wind speed | 3 m/s |
| Psychrometric calculations | Dew or frost point |
| Reproducibility Airchip | <0.02 %rh / 0.01 K |
| Exploitation software | ROTRONIC HW4 |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Firmware update | With internet and HW4 software |
| User information | from Software HW4 (devicemanager) |
| Data processing via HW4 | with interface cables |
| Device Protection by password | Yes |
| Type of output signals | 2 x 0…1 VDC |
| Analogue outputs scaleable by the user | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Digital output signal (standard) | UART |
| Service Interface | UART |
| Reverse voltage protection | Mechanically in the connector |
| Probe material | Stainless steel 1.4305 (V2A) |
| Probe cable material | PTFE |
| Enclosure material | Polycarbonate |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
