XB - OEM transmitter
The XB OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection possibilities, the transmitter can be adapted to customer wishes and used practically everywhere.
Applications
OEM transmitters in climate chambers, incubators, monitoring of industrial processes, etc.
Features
• Accuracy at 23 °C ±5 K: ±1.0 %rh / ±0.2 K
• Range of application probe: depending on probe from -100 to 200 °C 1
• Range of application electronics: -40…85 °C
• Large choice of probes
• Freely scalable analog outputs
• Simulator mode
• Direct 4-wire Pt100 connection (optionally available)
• Power supply
- Low voltage 3/4-wire (XB3x)
- Low voltage 2-wire (XB20)
• Signal outputs
- Current output
- Voltage output
• Version
- Printed circuit board with cable probe
• Probes
- PPS and chromium steel probes
- Probe diameter: 15 mm or 25/15 mm
- Probe length to 700 mm
- Cable lengths 2 and 5 m
• Output parameters
- Humidity & temperature
- Dew/Frost point & temperature or humidity
Accuracy at 23 ±5 °C | ±1.0 %rh / ±0.2 K |
---|---|
Operating range | -40…85 °C / 0…100 %rh |
Measuring range with integrated probe | -100…200 °C / 0…100 %rh |
Long-term stability | <1 %rh / year |
Humidity sensor | Hygromer IN-1 |
Temperature sensor | PT100 1/3 DIN Class B |
Allowed wind speed | 40 m/s, with filter |
Psychrometric calculations | Dew or frost point |
Number of probe inputs | 1 |
Firmware update | With internet and HW4 software |
Circuit type | 2 -Wire or 3/4-Wire |
Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
Probe material | Dependent on probe |
Service Interface | Mini USB (UART) |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
Want to learn more about our products?
We will be pleased to personally advise you.