XB - OEM transmitter
The XB OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection possibilities, the transmitter can be adapted to customer wishes and used practically everywhere.
Applications
OEM transmitters in climate chambers, incubators, monitoring of industrial processes, etc.
Features
• Accuracy at 23 °C ±5 K: ±1.0 %rh / ±0.2 K
• Range of application probe: depending on probe from -100 to 200 °C 1
• Range of application electronics: -40…85 °C
• Large choice of probes
• Freely scalable analog outputs
• Simulator mode
• Direct 4-wire Pt100 connection (optionally available)
• Power supply
- Low voltage 3/4-wire (XB3x)
- Low voltage 2-wire (XB20)
• Signal outputs
- Current output
- Voltage output
• Version
- Printed circuit board with cable probe
• Probes
- PEEK and chromium steel probes
- Probe diameter: 15 mm or 25/15 mm
- Probe length to 700 mm
- Cable lengths 2 and 5 m
• Output parameters
- Humidity & temperature
- Dew/Frost point & temperature or humidity
Precisione a 23 ±5 °C | ±1.0 %ur / ±0.2 K |
---|---|
Campo operativo dell'elettronica | -40…85 °C / 0…100 %ur |
Campo di misura con sonda integrata | -100 ... 200 ° C / 0 ... 100% ur |
Stabilità a lungo termine | <1 %ur / anno |
Sensore umidità | Hygromer IN-1 |
Sensore temperatura | PT100 1/3 DIN classe B |
Velocità dell'aria ammessa | 40 m/s, con filtro |
Calcoli psychrometrici | Punto di rugiada o punto di gelo |
Numero ingressi sonda | 1 |
Aggiornamento dello Firmware | Con internet e software HW4 |
Tipo di circuito | A 2 fili o 3 / 4 fili |
Lunghezza max. dello cavo | Fino a 5 mt con cavo passivo, fino a 100 mt con cavo attivo. |
Materiale della sonda | Dipendente da sonda |
Interfaccia di servizio | Mini USB (UART) |
Compatibilità FDA/GAMP | FDA 21 CFR Part 11 / GAMP compatibile |
Vorreste saperne di più sui nostri prodotti?
Siamo a Vostra disposizione.