HC2-ROPCB-F

HC2-ROPCB-F

OEM modules for customers specific solutions with the latest airchip technology.

Key features
• Adjusted OEM module for humidity and temperature
• Highest possible measuring accuracy
• Range of application: -50…100 °C / 0…100 %RH
• Calculates dew/frost point
• Two freely scalable analog outputs
• Digital UART interface
• Available with or without sensor frame
• Customized versions on request

More Information
湿度センサ ROTRONIC HYGROMER® IN-1
温度センサ PT100 1/3 DIN Class B
長期安定性 Better than 1 %RH / year
23 ±5°Cでの精度 ±0.8 %rh / ±0.1 K
応答時間 Ƭ63 <15 sec.
初期化所要時間 Typically <3 sec.
空気線図演算 Dew and frost point
ファームウェア更新 Via HW4 software
出力信号種類 Analog / Digital
結線方式 3/4 wire
ケーブル接続 Solder flats
重量 2g
ハウジング材質 No housing
消費電流 4.5 mA at 3.3 VDC
FDA / GAMPへの対応 FDA 21 CFR part 11 / GAMP5
電源 +3.2...5.5 VDC / Recommended power supply 3.3 VDC - If a different power supply is used, the module must be readjusted
調整 At 10, 35 and 80 %RH @ 23 °C
Supported software protocols RO-ASCII, MODBUS*, I2C*
Evaluation software / Compatibility ROTRONIC HW4**
Logging function 2000 data records. In loop or start-stop mode (function can be switched on with HW4 ** software)
温度調整 2 points with HW4**
湿度調整 Up to 100 points with HW4**
Output signals 2x 0...1 VDC analog / 1x digital UART
Analog output 1 0...1 VDC / 0...100 %RH
Analog output 2 0...1 VDC / -40...60 °C
Resolution analog output 16 bits
アナログ出力毎の負荷 V-signal: ≥1 kΩ/V
Digital interface options UART / (Ethernet, RS-485, USB optionally via accessories)
Polarity protection No
標準適合 EN 61000-6-4 & EN61000-6-2

Want to learn more about our products?
We will be pleased to personally advise you.

+81 422 502 600
info@michell-japan.co.jp

お問い合わせ:

Privacy Notice:By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy notice).

Copyright © 2021-present Rotronic, Inc. All rights reserved.