RMS-DI-L-R - Digital Input Module
RMS-DI-L-R - Digital Input Module
The digital input module stores all measured data on an event basis and sends it to the database via Ethernet. The minimum pulse time is 100 ms. Should the connection be lost, the module stores the data intermediately to protect data integrity and fills up the data gaps when the connection has been restored. The device has a battery so that logging of measured data is also ensured in the event of a failure in the external power supply.
Advantages
- Two input channels
- Data logging of up to 75,000 measured values
- Compatible with RMS-Config, RMS On-Premise and RMS SaaS
- Conforms to FDA CFR 21 Part 11 / GAMP 5
Applications
- Monitoring / Process control
- Safety and automation
- Direct condition control
Compatible with:
- RMS-Config
- RMS-WEB On-Premise
- RMS-CLD SaaS solutions
電源 / 消費電力 | >24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1 |
---|---|
寸法・サイズ | 89.7 x 62.2 x 108 mm |
IP保護等級 | IP20 |
耐火クラス | UL94-V0 |
測定間隔 | Event-based & interval (10 s to 15 min.) |
通信インターフェース | Ethernet |
ケーブル最大長 | <3 m |
重量 | 206 g |
ハウジング材質 | Polycarbonate |
FDA / GAMPへの対応 | FDA 21 CFR part 11 / GAMP5 |
バッテリ寿命 | 3 years at 23 °C |
入力 | 2 independent digital inputs |
デバイス種類 | RMS-DI-L-R |
保管および輸送条件 | -40..30 °C / 0..95 %RH |
電池 | RMS-BAT |
記憶容量 | 75,000 data points |
Maximum altitude | 2000 m ASL |
AC adapter requirements | 24 VDC ±10 % / 4 W nominal /<15 W power-limited |
Input frequency | Max. 0.833 Hz or 1.2 s |
Pulse recognition | >100 ms (periodically > 1.2 s) |
Input circuit | Logic level: 0 V / 5-24 V Trigger threshold: ~3.77 V Current consumption: <1 mA |
Reed circuit | Max. load at input 100 kΩ |
Protocols | HTTP |
Want to learn more about our products?
We will be pleased to personally advise you.
+81 422 502 600
info@michell-japan.co.jp