Menu
戻る

RMS-DI-L-R - Digital Input Module

The digital input module stores all measured data on an event basis and sends it to the database via Ethernet. The minimum pulse time is 100 ms. Should the connection be lost, the module stores the data intermediately to protect data integrity and fills up the data gaps when the connection has been restored. The device has a battery so that logging of measured data is also ensured in the event of a failure in the external power supply.

Advantages

  • Two input channels
  • Data logging of up to 75,000 measured values
  • Compatible with RMS-Config, RMS On-Premise and RMS SaaS
  • Conforms to FDA CFR 21 Part 11 / GAMP 5

Applications

  • Monitoring / Process control
  • Safety and automation
  • Direct condition control

Compatible with:

  • RMS-Config
  • RMS-WEB On-Premise
  • RMS-CLD SaaS solutions
デバイス種類 RMS-DI-L-R
使用範囲 -40…70 °C / 0...100 %RH
入力 2 independent digital inputs
電源 / 消費電力 >24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1
AC adapter requirements 24 VDC ±10 % / 4 W nominal /<15 W power-limited
電池 RMS-BAT
バッテリ寿命 3 years at 23 °C
Input frequency Max. 0.833 Hz or 1.2 s
Pulse recognition >100 ms (periodically > 1.2 s)
Input circuit Logic level: 0 V / 5-24 V
Trigger threshold: ~3.77 V
Current consumption: <1 mA
Reed circuit Max. load at input 100 kΩ
測定間隔 Event-based & interval (10 s to 15 min.)
記憶容量 75,000 data points
通信インターフェース Ethernet
Protocols HTTP
ケーブル最大長 <3 m
ハウジング材質 Polycarbonate
IP保護等級 IP20
耐火クラス UL94-V0
FDA / GAMPへの対応 FDA 21 CFR part 11 / GAMP5
保管および輸送条件 -40..30 °C / 0..95 %RH
Maximum altitude 2000 m ASL
寸法・サイズ 89.7 x 62.2 x 108 mm

Want to learn more about our products?
We will be pleased to personally advise you.

+81 422 502 600
info@michell-japan.co.jp

ご連絡先

* 必須項目