Menu
戻る

RMS-DO-L-R - Digital Output Module

The digital output module serves to display information, issue alarms and control events. The relays can be interrogated or set via Modbus TCP or the RMS software. It is possible to define the conditions in the RMS software and to actuate the outputs on the basis of them.

Advantages

  • Two output channels
  • Compatible with RMS-Config, RMS On-Premise and RMS SaaS
  • Conforms to FDA CFR 21 Part 11 / GAMP 5

Applications

  • Monitoring / Process control
  • Building automation
  • Industrial automation

Compatible with:

  • RMS-Config
  • RMS-WEB On-Premise
  • RMS-CLD SaaS solutions
デバイス種類 RMS-DO-L-R
使用範囲 -40…70 °C / 0...100 %RH
Number of outputs 2, polarity-independent
電源 / 消費電力 24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1
AC adapter requirements 24 VDC ±10 % / 4 W nominal /<15 W power-limited
Interface Digital signal / galvanically isolated
Relay switching capacity 50 VAC (peak) 1 A / 50 VDC/1 A, polarityindependent
測定間隔 >=10 s
通信インターフェース Ethernet
Protocols HTTP
ケーブル最大長 <3 m
ハウジング材質 Polycarbonate
IP保護等級 IP20
耐火クラス UL94-V0
FDA / GAMPへの対応 FDA 21 CFR part 11 / GAMP5
保管および輸送条件 -40..30 °C / 0..95 %RH
Maximum altitude 2000 m ASL
寸法・サイズ 89.7 x 62.2 x 108 mm
重量 155 g

Want to learn more about our products?
We will be pleased to personally advise you.

+81 422 502 600
info@michell-japan.co.jp

ご連絡先

* 必須項目