RMS-LOG-L - Data Logger - LAN Interface
RMS-LOG-L - Data Logger - LAN Interface
The data logger is the flexible component between the probe and the database in the ROTRONIC Monitoring System. It stores 44,000 pairs of measured values from the exchangeable HygroClip probe, and transmits them to the RMS database via LAN or wireless link. It guarantees absolute data protection, even if power supply and communications should temporarily break down.
Features
- Stores 44,000 pairs of measured values
- Fail-safe, thanks to internal battery
- 3 years battery lifetime
- LAN Interface
- Compatible with RMS Gateway, RMS server software and RMS Cloud
- Conforms to FDA 21 CFR Part 11 / GAMP5
| Dimensions | 105 x 113 x 38 mm |
|---|---|
| Exploitation software | RMS-Config / RMS Server Software / RMS Cloud |
| Software Update | Via RMS-Config / RMS Server Software / RMS Cloud |
| IP protection rating | IP65 |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
| Measurement interval | 10 s to 15 min |
| Communication interfaces | Ethernet |
| Reverse voltage protection | Protection diode to V + |
| Weight | 200 g |
| Housing | ABS |
| Current consumption | 50 mA |
| Power supply | 24 VDC / battery: 2 x AA, EVE-ER14505 |
| Battery lifetime | 3 years (at 23 °C and interval of 1 minute) |
| Measured value memory | 44,000 pairs of measurement values |
-
RMS-LOG-L – Short Instruction Manual Size: (492.43 KB)2019-01-04 03:37:14
- Online Manual
-
Online Manual
-
Datenlogger - Datasheet Size: (291.93 KB)2021-11-23 10:11:51
-
Data Logger Short Instruction Manual Size: (492.43 KB)2021-11-24 12:56:46
-
RMS-LOG-L EC Declaration of Conformity Size: (152.99 KB)2022-06-23 03:26:39
-
RMS LOG-L Declaration of Conformity UKCA Size: (152.21 KB)2022-06-23 03:28:27
-
RMS-LOG-L Firmware and Release Notes V1.6 Size: (296.45 KB)2022-11-07 10:56:08
-
RMS-HCD-IC102 - High Temperature Industrial Humidity ProbeThe HCD-IC is a completely digital probe designed for the Rotronic Monitoring System RMS. It measures humidity and temperature values from -100 to 200 °C and calculates the dew and frost point
Learn More -
RMS-HCD-S - Humidity and Temperature ProbeThe HCD-S is a completely digital probe designed for the Rotronic Monitoring System RMS. It measures humidity and temperature and calculates the dew/frost point.
Learn More -
RMS-BAT (Fanso replacement) - BATTERY FOR THE RMS DATA LOGGERS AND INPUT MODULESThe RMS Products have been tested and optimized with the Article RMS-BAT (Fanso ER14505M). Customers in Switzerland can order directly from Rotronic, customers from other countries please see the attached datasheet to order directly from your dealer or manufacturer.
Learn More -
RMS-PS Power supplyThe practical accessory for your RMS power supply.
Learn More
Want to learn more about our products?
We will be pleased to personally advise you.
+65 6376 2107
sg.info@processsensing.com
