The WB-0001 detects the presence of water or conductive fluids once it reaches a level that bridges the two conductive strips on the bottom of the housing. Once the strips are bridged, audible and visual alerts as well as an internal switch are triggered. The sensing hight can be adjusted from 0.08 mm to 13.5 mm using the included adjustable mounting bracket (that can be attached to any flat surface by either using the attached adhesive strips or mounting screws). 


  • Detect leaks as soon as they occur
  • Visual and audible alarm
  • Battery powered
  • Adjustable sensing hight
  • Relay output


  • Protecting equipment from water damage
  • Drip pans in air handler units

  • Raised floors in data centers, museums, archives and cellars
More Information
電源 / 消費電力 0.9 mA steady state / 3.0 mA during alarm condition
寸法・サイズ 53 x 105.23 x 30.77 mm
重量 137.5 g
ハウジング材質 ABS and polycarbonate
電源 3V CR2450 lithium metal battery
バッテリ寿命 5 years steady state / 48 hours during alarm condition
ケーブル長 1.5 metres
測定パラメータ Water or conductive fluids
IP protection class Water tight up to 3/4 of the body hight
Delivery package 1 CR2450 lithium metal battery Short instruction manual
Switch type SPST NO SSR
Audible alarm At least 85dB @30 cm distance
Visual alarm Red LED for water level, Yellow LED for low battery

Want to learn more about our products?
We will be pleased to personally advise you.

+81 422 502 600


Privacy Notice:By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy notice).

Copyright © 2021-present Rotronic, Inc. All rights reserved.