RMS-D-L - RMS-DISPLAY - Freely Configurable Display
RMS-D-L - RMS-DISPLAY - Freely Configurable Display
The LAN display is a freely configurable display. As a remote display, it can be placed optimally where it suits the viewer best. It is able to show the measured values, states and alarms of RMS products. The display shows up to four measured values. Two measured values are shown at a time. If more than 2 measured values have been selected, the display alternates between the values that are to be displayed every 5 seconds.
Advantages
- Shows up to 4 measured values
- Automatic adjustment of backlight on alarm
- Compatible with RMS data loggers, RMS On-premise and RMS SaaS
- Conforms to FDA CFR 21 Part 11 / GAMP 5
Applications
- Critical places
- Cleanrooms
Compatible with:
- All measuring points
- RMS-GW RMS Gateway
- RMS-WEB RMS On-premise
- RMS-CLD RMS SaaS
| Power consumption | 24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1 |
|---|---|
| Dimensions | 105 x 113 x 38 mm |
| IP protection rating | IP65 |
| Fire protection class | UL94-V2 |
| Measurement interval | 10 s |
| Communication interfaces | Ethernet |
| Weight | 206 g |
| Housing | PC / ABS |
| FDA / GAMP | FDA 21 CFR part 11 / GAMP5 |
| Device type | RMS Display |
| Storage and transport conditions | -20...30 °C / 0...95 %RH |
| AC adapter requirements | 24 VDC ±10 % / >4 W / power-limited |
| Protocols | HTTP |
| Display of measuring points | Up to 4 measuring points |
| Display diagonal | 2.26 inch |
-
RMS-D-L – Short Instruction Manual Size: (1.54 MB)2020-01-21 12:27:42
- Online Manual
-
Online Manual
-
RMS-CONFIG V1.1.4 Size: (1.55 MB)2024-08-08 12:09:15
-
RMS-D-L Datasheet Size: (100.92 KB)2021-11-18 01:43:17
-
RMS-D-L CE Declaration Size: (96.27 KB)2022-06-24 09:44:38
-
RMS-D-L Firmware and Release Notes V1.1 Size: (279.56 KB)2022-11-07 08:18:56
Want to learn more about our products?
We will be pleased to personally advise you.
+1 905 754-5164
sales@rotronic.ca
