RMS-DI-L-R - Digital Input Module
RMS-DI-L-R - Digital Input Module
The digital input module stores all measured data on an event basis and sends it to the database via Ethernet. The minimum pulse time is 100 ms. Should the connection be lost, the module stores the data intermediately to protect data integrity and fills up the data gaps when the connection has been restored. The device has a battery so that logging of measured data is also ensured in the event of a failure in the external power supply.
Advantages
- Two input channels
- Data logging of up to 75,000 measured values
- Compatible with RMS-Config, RMS On-Premise and RMS SaaS
- Conforms to FDA CFR 21 Part 11 / GAMP 5
Applications
- Monitoring / Process control
- Safety and automation
- Direct condition control
Compatible with:
- RMS-Config
- RMS-WEB On-Premise
- RMS-CLD SaaS solutions
| Power consumption | >24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1 |
|---|---|
| Dimensions | 89.7 x 62.2 x 108 mm |
| IP protection rating | IP20 |
| Fire protection class | UL94-V0 |
| Measurement interval | Event-based & interval (10 s to 15 min.) |
| Communication interfaces | Ethernet |
| Max. cable length | <3 m |
| Weight | 206 g |
| Housing | Polycarbonate |
| FDA / GAMP | FDA 21 CFR part 11 / GAMP5 |
| Battery lifetime | 3 years at 23 °C |
| Inputs | 2 independent digital inputs |
| Device type | RMS-DI-L-R |
| Storage and transport conditions | -40..30 °C / 0..95 %RH |
| Battery | RMS-BAT |
| Storage capacity | 75,000 data points |
| Maximum altitude | 2000 m au-dessus du niveau de la mer |
| AC adapter requirements | 24 VDC ±10 % / 4 W nominal /<15 W power-limited |
| Input frequency | Max. 0.833 Hz or 1.2 s |
| Pulse recognition | >100 ms (periodically > 1.2 s) |
| Input circuit | Logic level: 0 V / 5-24 V Trigger threshold: ~3.77 V Current consumption: <1 mA |
| Reed circuit | Max. load at input 100 kΩ |
| Protocols | HTTP |
-
RMS-DI-L-R – Short Instruction Manual Size: (414.56 KB)2019-01-04 02:34:15
- Online Manual
-
Online Manual
-
RMS-CONFIG V1.1.4 Size: (1.55 MB)2023-12-19 04:14:09
-
RMS-DI-L-R Datasheet Size: (105.89 KB)2021-11-19 10:32:22
-
RMS DI-L-R CE Declaration Size: (137.51 KB)2022-06-24 10:58:21
-
RMS DI-L-R Firmware and Release Notes V1.2 Size: (269.34 KB)2022-11-07 11:19:38
-
RMS-BAT (Fanso replacement) - BATTERY FOR THE RMS DATA LOGGERS AND INPUT MODULESThe RMS Products have been tested and optimized with the Article RMS-BAT (Fanso ER14505M). Customers in Switzerland can order directly from Rotronic, customers from other countries please see the attached datasheet to order directly from your dealer or manufacturer.
Learn More -
RMS-PS-R Power supplyThe practical accessory for your RMS power supply.
Learn More
Want to learn more about our products?
We will be pleased to personally advise you.
+1 905 754-5164
sales@rotronic.ca
