- RMS Home
- Monitoring System
- Data Logger
- RMS-LOG-915 - Data Logger - Wireless Interface - 915 MHz
- RMS OVERVIEW
- RMS ARCHITECTURE
- RMS SERVICES
- RMS CLOUD SOLUTIONS
- MONITORING SOFTWARE
- RMS ALARMING
- INTEGRATE THIRD-PARTY DEVICES
- RMS Hardware by Measurement Parameter
- RMS Hardware
- REGULATIONS AND GUIDELINES
- RISK ASSESSMENT
-
RMS APPLICATIONS
- Medical Cannabis Monitoring
- Wine Cellar Monitoring
- Vaccine Transport & Storage Monitoring
- Cold Chain Monitoring
- Cold Storage Monitoring
- Compressed Air Systems Monitoring
- Incubator Monitoring
- Cleanroom Monitoring
- Warehouse Monitoring
- Medical & Healthcare Monitoring
- Food and Tobacco Monitoring
- Environmental Monitoring
- Data Center Monitoring
- Pharmacies & Drugstore Monitoring (Temperature)
- Temperature Monitoring
- Medical Device Production Monitoring
- Health Care Room Monitoring
- Storage Equipment Qualification
- VIDEO TUTORIALS
- RMS DOWNLOADS
- CONTACT
Data Logger
RMS-LOG-915 - Data Logger - Wireless Interface - 915 MHz
The data logger is the flexible component between the probe and the database in the ROTRONIC Monitoring System. It stores 44,000 pairs of measured values from the exchangeable HygroClip probe, and transmits them to the RMS database via LAN or wireless link. It guarantees absolute data protection, even if power supply and communications should temporarily break down.
Features
- Stores 44,000 pairs of measured values
- Fail-safe, thanks to internal battery
- 3 years battery lifetime
- Wireless Interface
- Compatible with RMS Gateway, RMS server software and RMS Cloud
- Conforms to FDA 21 CFR Part 11 / GAMP5
Dimensions | 105 x 113 x 38 mm |
---|---|
Exploitation software | RMS-Config / RMS Server Software / RMS Cloud |
Software Update | Via RMS-Config / RMS Server Software / RMS Cloud |
IP protection rating | IP65 |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
Measurement interval | 10 s to 15 min |
Communication interfaces | 915 MHz |
Reverse voltage protection | Protection diode to V + |
Weight | 200 g |
Housing | ABS |
Current consumption | 50 mA |
Power supply | 24 VDC / battery: 2 x AA, EVE-ER14505 |
Battery lifetime | 3 years (at 23 °C and interval of 1 minute) |
Measured value memory | 44,000 pairs of measurement values |
- RMS-LOG-915 - Short instruction manual Size: (301.55 KB)2018-04-26 05:46:00
- RMS 915 – FCC Declaration Size: (2.54 MB)2023-12-19 04:14:09
- Online Manual
- Online Manual
- RMS-CONFIG V1.1.4 Size: (1.55 MB)2024-08-08 12:09:15
- Datenlogger - Datasheet Size: (291.93 KB)2021-11-23 10:11:51
- Data Logger Short Instruction Manual Size: (492.43 KB)2021-11-24 12:56:46
- RMS-LOG 868 / 915 Firmware and Release Notes V1.6 Size: (261.09 KB)2022-11-07 10:23:35
-
RMS-HCD-S - Humidity and Temperature Probe
The HCD-S is a completely digital probe designed for the Rotronic Monitoring System RMS. It measures humidity and temperature and calculates the dew/frost point.
Learn More -
PCD-S - RMS Differential Pressure ProbeThe compact differential pressure probe with flow or diaphragm sensor technology Learn More
-
RMS-GW-915 Gateway
Interface between wireless data loggers and software
Learn More -
RMS-BAT (Fanso replacement) - BATTERY FOR THE RMS DATA LOGGERS AND INPUT MODULES
The RMS Products have been tested and optimized with the Article RMS-BAT (Fanso ER14505M). Customers in Switzerland can order directly from Rotronic, customers from other countries please see the attached datasheet to order directly from your dealer or manufacturer.
Learn More -
RMS-PS Power supply
The practical accessory for your RMS power supply.
Learn More
Want to learn more about our products?
We will be pleased to personally advise you.
+1 905 754-5164
sales@rotronic.ca