WB-0001
WB-0001
The WB-0001 detects the presence of water or conductive fluids once it reaches a level that bridges the two conductive strips on the bottom of the housing. Once the strips are bridged, audible and visual alerts as well as an internal switch are triggered. The sensing hight can be adjusted from 0.08 mm to 13.5 mm using the included adjustable mounting bracket (that can be attached to any flat surface by either using the attached adhesive strips or mounting screws).
Advantages
- Detect leaks as soon as they occur
- Visual and audible alarm
- Battery powered
- Adjustable sensing hight
- Relay output
Applications
- Protecting equipment from water damage
-
Drip pans in air handler units
- Raised floors in data centers, museums, archives and cellars
| Power consumption | 0.9 mA steady state / 3.0 mA during alarm condition |
|---|---|
| Dimensions | 53 x 105.23 x 30.77 mm |
| Weight | 137.5 g |
| Housing | ABS and polycarbonate |
| Power supply | 3V CR2450 lithium metal battery |
| Battery lifetime | 5 years steady state / 48 hours during alarm condition |
| Cable lengths | 1.5 metres |
| Parameters | Water or conductive fluids |
| IP protection class | Water tight up to 3/4 of the body hight |
| Delivery package | 1 CR2450 lithium metal battery Short instruction manual |
| Switch type | SPST NO SSR |
| Audible alarm | At least 85dB @30 cm distance |
| Visual alarm | Red LED for water level, Yellow LED for low battery |
-
WB-0001 – Datasheet Size: (201.51 KB)2019-01-03 09:55:27
-
RMS Accessories – Datasheet Size: (744.22 KB)2020-01-17 05:01:56
Want to learn more about our products?
We will be pleased to personally advise you.
+1 905 754-5164
sales@rotronic.ca
