Rotronic Monitoring System

RMS-D-L - RMS-DISPLAY - Freely Configurable Display

The LAN display is a freely configurable display. As a remote display, it can be placed optimally where it suits the viewer best. It is able to show the measured values, states and alarms of RMS products. The display shows up to four measured values. Two measured values are shown at a time. If more than 2 measured values have been selected, the display alternates between the values that are to be displayed every 5 seconds.

Advantages

  • Shows up to 4 measured values
  • Automatic adjustment of backlight on alarm
  • Compatible with RMS data loggers, RMS On-premise and RMS SaaS
  • Conforms to FDA CFR 21 Part 11 / GAMP 5

Applications

  • Critical places
  • Cleanrooms

Compatible with:

  • All measuring points
  • RMS-GW RMS Gateway
  • RMS-WEB RMS On-premise
  • RMS-CLD RMS SaaS
More Information
Power consumption 24 VDC ±10 % / <100 mA / PoE: 802.3af-2003, Class 1
Dimensions 105 x 113 x 38 mm
IP protection rating IP65
Fire protection class UL94-V2
Measurement interval 10 s
Communication interfaces Ethernet
Weight 206 g
Housing PC / ABS
FDA / GAMP FDA 21 CFR part 11 / GAMP5
Device type RMS Display
Storage and transport conditions -20...30 °C / 0...95 %RH
AC adapter requirements 24 VDC ±10 % / >4 W / power-limited
Protocols HTTP
Display of measuring points Up to 4 measuring points
Display diagonal 2.26 inch

Want to learn more about our products?
We will be pleased to personally advise you.

+1 631 427-3898
sales@rotronic-usa.com

GENERAL CONTACT:

Privacy Notice: By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy notice).

Copyright © 2021-present Rotronic, Inc. All rights reserved.