RMS-LOG-L-D – Data logger with display

RMS-LOG-L-D – Data logger with display

The RMS-LOG-L-D stores up to 44,000 pairs of measured values from the interchangeable CO2, differential pressure, humidity, temperature or low dew point probe, and transmits them to the RMS database via LAN link.Thanks to its autonomous operation, the logger can display current readings as well as visual and audible alarms even if the power supply and communication should fail temporarily.

Benefits

  • 44,000 data point memory
  • Visual and audible alarms
  • Autonomous operation on failure
  • Redundant power supply
  • Conforms to FDA CFR 21 Part 11 / GAMP 5

Applications

  • Critical points
  • Pharma monitoring
  • Incubators

Compatible with

  • RMS-WEB, RMS Server Software
  • RMS-CLD, RMS Cloud
  • Autonomous operation and audible alarms from V2.1
More Information
Dimensions 105 x 113 x 38 mm
Fire protection class UL94-V2
Measurement interval 10 s…300 s
Enclosure material PC. ABS
Weight 240g
Start-up time < 10 s
Current consumption 50 mA
Power supply 24 VDC ±10% / Battery: RMS-BAT (2xAA, LiSocl2)
Battery lifetime @60 s & 600 s Intervall
HCD-S / HCD-IC: 7 d
CCD-S-XXX: 2.4 d
PCD-S-XXX: 15 d
Storage and transport conditions -20…30 °C, non-condensing
Storage capacity 44,000 data points
Maximum altitude 2000 m ASL
AC adapter requirements 24 VDC ±10 %, 4 W minimum, > 5 W power-limited
Protocols HTTP
Interface Ethernet
Ethernet cable requirement Min. Cat 5, SFTP, max. 30 m
IP protection class IP65
Number of measuring points 2
PoE 802.3af-2003, Class 1
Software compatibility ≥ V1.3.0, from V2.1 all functions

Want to learn more about our products?
We will be pleased to personally advise you.

+41 44 838 11 11
measure@rotronic.ch

GENERAL CONTACT:

Privacy Notice:By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy).

Copyright © 2021-present Rotronic, Inc. All rights reserved.