- RMS Home
- Monitoring System
- Wireless Mini Logger
- RMS-MLOG-T10-915 - Wireless Mini Data Logger - Temperature with external (NTC) probe
- RMS-MLOG-T10-915 - Wireless Mini Data Logger - Temperature with external (NTC) probe
- RMS OVERVIEW
- RMS ARCHITECTURE
- RMS SERVICES
- RMS CLOUD SOLUTIONS
- MONITORING SOFTWARE
- RMS ALARMING
- INTEGRATE THIRD-PARTY DEVICES
- RMS Hardware by Measurement Parameter
- RMS Hardware
- REGULATIONS AND GUIDELINES
- RISK ASSESSMENT
-
RMS APPLICATIONS
- Medical Cannabis Monitoring
- Wine Cellar Monitoring
- Vaccine Transport & Storage Monitoring
- Cold Chain Monitoring
- Cold Storage Monitoring
- Compressed Air Systems Monitoring
- Incubator Monitoring
- Cleanroom Monitoring
- Warehouse Monitoring
- Medical & Healthcare Monitoring
- Food and Tobacco Monitoring
- Environmental Monitoring
- Data Center Monitoring
- Pharmacies & Drugstore Monitoring (Temperature)
- Temperature Monitoring
- Medical Device Production Monitoring
- Health Care Room Monitoring
- Storage Equipment Qualification
- VIDEO TUTORIALS
- RMS DOWNLOADS
- CONTACT
RMS-MLOG-T10-915 - Wireless Mini Data Logger - Temperature with external (NTC) probe
RMS-MLOG-T10-915 - Wireless Mini Data Logger - Temperature with external (NTC) probe
The wireless mini data logger is the low-cost data logger in the ROTRONIC monitoring system. Its small housing and wireless interface make it a really flexible data logger. The mini logger is available in various sensor variants: temperature sensor (NTC), external temperature sensor (NTC) & light, voltage measurement, current measurement, or digital switch contact. With this versatility, it can monitor refrigerators and incubators, as well as door contacts and OEM analog devices.
Features
- Measures Temperature with an external (NTC) probe
- Stores 10,000 measured values
- Fail-safe, thanks to internal battery
- 3 years battery lifetime
- Compatible with RMS Gateway, RMS server software and RMS Cloud
- Conforms to FDA 21 CFR Part 11 / GAMP5
Dimensions | 83 x 29 x 29 mm |
---|---|
Exploitation software | RMS-Config / RMS Server Software / RMS Cloud |
Software Update | Via RMS-Config / RMS Server Software / RMS Cloud |
IP protection rating | IP65 |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
Measurement interval | 10 s to 15 min |
Communication interfaces | 915 MHz |
Weight | 100 g |
Housing | ABS |
Power supply | 1 x AA, RMS-BAT (Model: ER14505M) |
Battery lifetime | 3 years (at 23 °C and interval of 1 minute) |
Measured value memory | 10,000 measurement values, 13,000 data points (RMS-MLOG-B/RMS-MLOG-BT) |
- RMS 915 – FCC Declaration Size: (2.54 MB)2023-12-19 04:14:09
- RMS-MLOG-915 – Short Instruction Manual Size: (772.03 KB)2023-12-19 04:14:09
- Online Manual
- Online Manual
- RMS-CONFIG V1.1.4 Size: (1.55 MB)2024-08-08 12:09:15
- RMS-MLOG-X-868/915 Firmware Size: (886.71 KB)2023-12-19 04:14:09
-
RMS-GW-915 Gateway
Interface between wireless data loggers and software
Learn More -
RMS-BAT (Fanso replacement) - BATTERY FOR THE RMS DATA LOGGERS AND INPUT MODULES
The RMS Products have been tested and optimized with the Article RMS-BAT (Fanso ER14505M). Customers in Switzerland can order directly from Rotronic, customers from other countries please see the attached datasheet to order directly from your dealer or manufacturer.
Learn More -
RMS T10-0001
The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature.
Learn More -
RMS T10-0002
The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.
Learn More -
RMS T10-0003
The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.
Learn More -
RMS T10-0005
The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature.
Learn More -
RMS T10-0006
The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.
Learn More
Want to learn more about our products?
We will be pleased to personally advise you.
+41 44 838 11 11
measure@rotronic.ch