Choice of of digital RMS Probes

RMS T10-0005

The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers.

The data logger temperature range is limited to -35…80°C. The RMS temperature portfolio covers a wide range of applications, from the coldest such as liquid nitrogen tanks and cryogenic freezers, refrigerators and cold rooms to hotter ones such as water baths, incubators, ovens and autoclaves.

Certain probes are also designed for specific applications for monitoring legionella within water pipes and monitoring room temperature. It is crucial when setting up your RMS-MLOG-T10-868/915 with the T10 temperature probe to configure the logger accordingly with the software as the characteristic curve of each NTC is stored in the firmware.

Benefits

  • NTC sensor
  • No influence from the lead
  • High temperature sensitivity

Applications

  • Dry ice
  • Freezers
  • Water baths
More Information
Connector Standard Rotronic 7-pin connector
T63 90 s
Cable lengths 4 metres
Sensor type NTC1k
IP protection class IP68
Cable material PTFE
Cable application range -190...+260 °C
Cable diameter 4
Probe head material VA4 1.4571
Probe length 50 mm
Probe diameter 6
Sensor application range -90…50 °C

Want to learn more about our products?
We will be pleased to personally advise you.

+41 44 838 11 11
measure@rotronic.ch

GENERAL CONTACT:

Privacy Notice:By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy policy).

Copyright © 2021-present Rotronic, Inc. All rights reserved.