HC2-ROPCB-F
HC2-ROPCB-F
OEM modules for customers specific solutions with the latest airchip technology.
Key features
• Adjusted OEM module for humidity and temperature
• Highest possible measuring accuracy
• Range of application: -50…100 °C / 0…100 %RH
• Calculates dew/frost point
• Two freely scalable analog outputs
• Digital UART interface
• Available with or without sensor frame
• Customized versions on request
Humidity sensor | ROTRONIC HYGROMER® IN-1 |
---|---|
Temperature sensor | PT100 1/3 DIN Class B |
Long-term stability | Better than 1 %RH / year |
Accuracy at 23 ±5 °C | ±0.8 %rh / ±0.1 K |
Response time t 63 | <15 sec. |
Initialisation time | Typically <3 sec. |
Psychrometric calculations | Dew and frost point |
Software Update | Via HW4 software |
Type of output signals | Analog / Digital |
Circuit type | 3/4 wire |
Cable connections | Solder flats |
Weight | 2g |
Housing | No housing |
Current consumption | 4.5 mA at 3.3 VDC |
FDA / GAMP | FDA 21 CFR part 11 / GAMP5 |
Power supply | +3.2...5.5 VDC / Recommended power supply 3.3 VDC - If a different power supply is used, the module must be readjusted |
Adjustment | At 10, 35 and 80 %RH @ 23 °C |
Supported software protocols | RO-ASCII, MODBUS*, I2C* |
Evaluation software / Compatibility | ROTRONIC HW4** |
Logging function | 2000 data records. In loop or start-stop mode (function can be switched on with HW4 ** software) |
Temperature adjustment | 2 points with HW4** |
Humidity adjustment | Up to 100 points with HW4** |
Output signals | 2x 0...1 VDC analog / 1x digital UART |
Analog output 1 | 0...1 VDC / 0...100 %RH |
Analog output 2 | 0...1 VDC / -40...60 °C |
Resolution analog output | 16 bits |
Load per analog output | V-signal: ≥1 kΩ/V |
Digital interface options | UART / (Ethernet, RS-485, USB optionally via accessories) |
Polarity protection | No |
Standards | EN 61000-6-4 & EN61000-6-2 |
Want to learn more about our products?
We will be pleased to personally advise you.
+1 631 427-3898
sales@rotronic-usa.com