Humidity - Measurement and Monitoring of relative Humidity
HC2A-S3 - Standard meteo probe
The HC2A-S3 probe is the meteorological probe with a white housing - same specification overall as the HC2A-S probe but with a different filter (larger pore size suitable for meteorological applications). It measures relative humidity and temperature and calculates the dew/frost point.
Features of the meteorological probe
- Accuracy: ±0.8 %rh, ±0.1 K, at 23 °C (10...30 °C)
- Range of application: -50…100 °C / 0…100 %rh
- Digital interface (UART) and scalable analog outputs, 0…1 V
- Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
- Adjusted at 23 °C and 10, 35, 80 %rh
Advantages
- Measures relative humidity and temperature
- Outstanding accuracy, repeatability and long-term stability
- Advanced probe housing and construction
- Available with interchangeable sensor
- Hot swappable, no calibration adjustment required due to the digital interface with Rotronic devices
Smart Electronic
- Based on the Rotronic’s AirChip3000
- Calculates the dew / frost point
- Alarm generation
- Saves adjustment data so that probes can be
- interchanged without re-adjusting
- Hot-swappable
Flexibility and Compatibility
- User scalable analog analog ouput signals (2x 0…1V)1
- Digital interface via UART2
- Rapidly interfaced with HygroClip2 devices from
- Rotronic or in OEM3 applications
| Probe type | Meteorological probe |
|---|---|
| Humidity sensor | Hygromer HT-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Long-term stability | <1 %rh / year |
| Accuracy w. adjustment profile "standard" | ±0.8 %RH / ±0.1 K, at 10...30 °C Adjustment at 23 °C and 10, 35, 80 %RH |
| Accuracy w. adjustment profile "High Precision" | ±0.5 %RH / ±0.1 K, at 10...30 °C at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH |
| Reproducibility Airchip | <0.02 %rh / 0.01 K |
| Response time t 63 | <15 sec. |
| Power consumption | 3.3...5 VDC, Calibration @ 3.3 VDC / ~4.5 mA |
| Dimensions | Ø15 x 108 mm |
| Operating range | -50…80 °C / 0…100 %rh |
| Allowed wind speed | 20 m/s, with filter |
| Exploitation software | ROTRONIC HW4 |
| Psychrometric calculations | Dew or frost point |
| Analogue outputs scaleable by the user | Yes |
| Software Update | With internet and HW4 software |
| User information | from Software HW4 (devicemanager) |
| Data processing via HW4 | with interface cables |
| Type of output signals | 2 x 0…1 VDC |
| Digital output signal (standard) | UART |
| Service Interface | UART |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Device Protection by password | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Communication interfaces | UART |
| Reverse voltage protection | Mechanically in the connector |
| Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
| Probe protection | Polycarbonate plastic cage, white |
| Filter cartridge | Polyethylene dust filter, white, 40 um |
| Enclosure material | Polycarbonate |
| Weight | 17 g |
| Filter type | Polyethylene, 40 μm |
-
HC2A - Short instruction manual Size: (304.7 KB)2022-03-08 10:52:16
-
HC2A - Data sheet Size: (555.88 KB)2022-03-24 10:42:48
-
HC2A - fiche technique Size: (559.6 KB)2022-03-24 10:42:48
-
HC2A - Scheda tecnica Size: (557.62 KB)2022-03-24 10:42:48
-
HC2A-S 高精度プローブ Size: (1.54 MB)2022-03-08 10:52:16
-
HC2A-S / HC2A-S3 / HC2A-SH CE - Declaration Size: (90.08 KB)2022-09-20 08:47:32
-
Hygroclip 2 Advanced Manual V1.7 DE Size: (776.95 KB)2022-09-20 08:47:32
-
HC2A-S3A - CE Declaration Size: (90.08 KB)2022-09-20 08:47:32
-
Hygroclip 2 Advanced Manual V1.7 EN Size: (670.98 KB)2022-09-20 08:47:32
-
HC2A-S3A CE Declaration UKCA Size: (48.73 KB)2022-09-20 08:47:32
-
HC2A-S3A - UKCA Declaration Size: (42.42 KB)2023-01-05 10:53:28
Want to learn more about our products?
We will be pleased to personally advise you.
+1 631 427-3898
sales@rotronic-usa.com
