湿度 - 相対湿度の計測、監視
HC2A-IE02-XX Screw-In Probe - Stainless Steel Probe for pressurized conduits and vessels
The Rotronic industrial screw-in probe is especially suitable for high temperatures up to 200 °C and demanding industrial environments with applications in which pressures prevail. It measures humidity and temperature and is compatible with the HF5, HF8 series measurement transmitters, HP32 and HP23 handheld devices and the HL-NT dataloggers.
Advantages of the industrial probe
- Pressure resistant up to 100 bars
- Wide temperature measurement range -100…200 °C
- Outstanding accuracy
- repeatability and long-term stability
- Advanced probe housing and construction
- Hot swappable, no calibration adjustment required due to the digital interface with Rotronic devices
Applications of the probe
- Industrial manufacturing
- Drying processes
- Food and pharmaceutical manufacturing
Smart electronics
- Based on the Rotronic’s AirChip3000
- Calculates the dew / frost point
- Alarm generation
- Saves adjustment data so that probes can be interchanged without re-adjusting
- Can be cable mount up to 5 m
- Hot-swappable
Flexibility and compatibility of the industrial probe
- User scalable analog ouput signals (2x 0…1V)
- Digital interface via UART
- Rapidly interfaced with HygroClip2 compatible devices from Rotronic or for OEM applications
寸法・サイズ | HC2A-IE02-NPT: NPT thread x 104 mm x 2 m Cable HC2A-IE02-G : G thread x 104 mm x 2 m Cable |
---|---|
プローブ種類 | Industrial probe |
湿度センサ | Hygromer HT-1 |
温度センサ | PT100 1/3 DIN Class B |
長期安定性 | <1 %rh / year |
測定範囲 | -100...200 °C (short-term peak load) / 0...100 %rh |
精度("標準" 調整プロファイル適用時) | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
23 ±5°Cでの精度 | ±0.8 %rh / ±0.1 K |
応答時間 Ƭ63 | <15 sec. |
動作範囲 | -100…200 °C / 0…100 %rh |
許容風速 | 3.5 m/s, without filter |
空気線図演算 | Dew or frost point |
ユーザーによるスケーリングが可能なアナログ出力数 | Yes |
ファームウェア更新 | With internet and HW4 software |
ユーザー情報 | from Software HW4 (devicemanager) |
出力信号種類 | 2 x 0…1 VDC |
デジタル出力信号(標準) | UART |
サービスインターフェース | UART |
FDA / GAMP への適合性 | FDA 21 CFR Part 11 and GAMP compatible |
プローブ調整ソフトウェア | 1 Point & multipoint %rh & °C |
アナログ出力信号(標準) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
逆電圧保護 | Mechanically in the connector |
ケーブル最大長 | Up to 5 m with passive cable. Up to 100 m with active cable. |
プローブ材質 | PPS, Stainless steel 1.4301 |
プローブ保護材 | Filter carrier, brass nickel plated |
フィルタカートリッジ | depending on the application, order separately |
電源 | 3.3…5 VDC |
Pressure range | 0-100 bar |
Want to learn more about our products?
We will be pleased to personally advise you.
+81 422 502 600
info@michell-japan.co.jp