工業用プローブ HygroClip2シリーズ

HC2A-IE02-XX Screw-In Probe - Stainless Steel Probe for pressurized conduits and vessels

The Rotronic industrial screw-in probe is especially suitable for high temperatures up to 200 °C and demanding industrial environments with applications in which pressures prevail. It measures humidity and temperature and is compatible with the HF5, HF8 series measurement transmitters, HP32 and HP23 handheld devices and the HL-NT dataloggers.

Advantages of the industrial probe

  • Pressure resistant up to 100 bars
  • Wide temperature measurement range -100…200 °C
  • Outstanding accuracy
  • repeatability and long-term stability
  • Advanced probe housing and construction
  • Hot swappable, no calibration adjustment required due to the digital interface with Rotronic devices

Applications of the probe

  • Industrial manufacturing
  • Drying processes
  • Food and pharmaceutical manufacturing

Smart electronics

  • Based on the Rotronic’s AirChip3000
  • Calculates the dew / frost point
  • Alarm generation
  • Saves adjustment data so that probes can be
  • interchanged without re-adjusting
  • Can be cable mount up to 5 m
  • Hot-swappable

Flexibility and compatibility of the industrial probe

  • User scalable analog ouput signals (2x 0…1V)
  • Digital interface via UART
  • Rapidly interfaced with HygroClip2 compatible devices from Rotronic or for OEM applications
More Information
寸法・サイズ HC2A-IE02-NPT: NPT thread x 104 mm x 2 m Cable
HC2A-IE02-G : G thread x 104 mm x 2 m Cable
プローブ種類 Industrial probe
湿度センサ Hygromer HT-1
温度センサ PT100 1/3 DIN Class B
長期安定性 <1 %rh / year
測定範囲 -100...200 °C (short-term peak load) / 0...100 %rh
精度("標準" 調整プロファイル適用時) at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
23 ±5°Cでの精度 ±0.8 %rh / ±0.1 K
応答時間 Ƭ63 <15 sec.
動作範囲 -100…200 °C / 0…100 %rh
許容風速 3.5 m/s, without filter
空気線図演算 Dew or frost point
ユーザーによるスケーリングが可能なアナログ出力数 Yes
ファームウェア更新 With internet and HW4 software
ユーザー情報 from Software HW4 (devicemanager)
出力信号種類 2 x 0…1 VDC
デジタル出力信号(標準) UART
サービスインターフェース UART
FDA / GAMP への適合性 FDA 21 CFR Part 11 and GAMP compatible
プローブ調整ソフトウェア 1 Point & multipoint %rh & °C
アナログ出力信号(標準) 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
逆電圧保護 Mechanically in the connector
ケーブル最大長 Up to 5 m with passive cable. Up to 100 m with active cable.
プローブ材質 PPS, Stainless steel 1.4301
プローブ保護材 Filter carrier, brass nickel plated
フィルタカートリッジ depending on the application, order separately
電源 3.3…5 VDC
Pressure range 0-100 bar

Want to learn more about our products?
We will be pleased to personally advise you.

+81 422 502 600
info@michell-japan.co.jp

お問い合わせ:

Privacy Notice:By submitting the form, you agree that your data will be used to process your request (further information and revocation instructions can be found in the privacy notice).

Copyright © 2021-present Rotronic, Inc. All rights reserved.